Search in

Go to Search


Advanced search

Measuring microphone - All Countries

  •  Electric engineering, automation, process control engineering
    •  Metrology, process metrology
      •  Sound and vibration measurement  (3 Companies)
        •  Measuring microphone  (1 Company)



Sigmatest Messtechnik, Gottmadingen, 78244, Germany

Give full particulars          Sending E-mail to this company.          Starting homepageSelect


Measuring microphone
These are fine goals, but few hobby speaker builders can afford or can justify the expense of a fully calibrated measuring set, or even the microphone by itself. - Figure 2-Typical Electret Microphone Schematic The disadvantages of the standard method and commercial electret microphones in general are. - Figure 5-Radio Shack Tandy Boundary Microphone Using only the shield and red lead microphone connection-see Figure 2, above for internal schematic, this mic unit can be connected to the preamp shown below.
more Info ...


Measuring microphone

Would you like your products to be easily found in search engines?
Sign-Up your company here and test search engine optimization free of charge!
With our SEO the number of potential customers will increase considerably!
Make a comparison now!

The area of the qualifier eCl@ss maintaining a kind of production Measuring microphone on the B2B-Portal

 Enter Your Business Free of Charge

Are you also a manufacturer, dealer, or service provider and would like to enter your business in the product category Measuring microphone in order to gain new customers? A business entry into our B2B Search Engine is the ideal online-marketing solution. You can Enter Your Business free of charge and test our Search Engine Optimization, regardless of whether your product is Measuring microphone or you offer other products or services. Your Business Entry with Search Engine Optimization will also allow your business to take advantage of the international scope of the B2B Search Engine Bridge2B and reach prospective customers on all continents.


It offers over 16 hours use from three AA batteries. There is a balanced XLR input for making electrical measurements of balanced signals and for the connection of a measuring microphone such as the MiniSPL. - A self-contained omni-directional half-inch measuring microphone with built-in impedance converter, pre-amplifier and power supply. It is battery powered and the XLR-output is balanced. The MiniSPL is classified as Class 2 in accordance with IEC 61672 and is factory adjusted to a sensitivity of 20 mV/Pa.
S Po=Reference Pascal? S Constant=0 00002 Pa The above formula will provide the maximum rating that a microphone when combined with a specific preamplifier can be capable of measuring. - The 130 series provide an inexpensive alternative to the 377 series. The 130 series are accurate for frequency responses and great for trending, but are more sensitive to changes in temperature, and less accurate than the 377 series of high precision condenser microphones, when measuring dB. PCB PIEZOTRONICS, INC.
All our meters, microphones, accelerometers etc. - Please take care as any damage must be charged for and usually means a replacement microphone. - Omnidirectional Measurement Microphones In this section we also include environmental and outdoor microphones, preamplifiers, multi-channel microphone power supplies, etc. - The B&K 3595 is a two-microphone probe kit for measuring sound intensity. - The GRAS 41AL microphone is designed to maintain a microphone's specifications when fitted with a rain cover and windshield.
Products 96 Download MX399 SoundPro Microphone Multiplexer Sencore, Inc. - High quality test and measurement recording microphone. - The MM 1 is a measurement microphone which has been designed specifically for measuring sound reinforcement and PA-systems. - ½" 50 mV/Pa sensitivity free field microphone optimised for infrasound and other low frequency measurements. - Under IEC and ANSI standards, a sound intensity measuring system consists of a two microphone sound intensity probe and a dual channel processor.
A pressure re-into an electrical signal for processing The preamplifier requires power sponse microphone is more often used in the measuring instrument. - The MMK-1 microphone is a fects the microphone behavior above 1/2. - Low frequency response is determined by the size of the each individual microphone always appears on the Calibra-static pressure equalization vent in the microphone. - The noise floor for this microphone is 22 dBA The sensitivity of a microphone is defined as its output SPL the extra letter?
And above 20 kHz. And do not have "weighted or equalized frequency response. They are also optimized for measuring high SPL sound intensity, for example, measurements taken at fraction of an inch from a speaker driver-to measure speaker response. - Note that, like the microphone, purpose designed amplifiers for the WM61A are a fairly straight forward process-in this case, the microphone was designed for measuring near field distortion products of a Subwoofer Speaker Design at high SPLs in conjunction with Baudline.

 Find Your Distributor

You will also find further entries by businesses that offer Measuring microphone in our B2B Directory. Enter the search criterion here and select the appropriate entry in the B2B Search Engine. Or locate other entries by searching through the B2B Search Engine. "Measuring microphone" is only one of many product categories at the B2B Search Engine and B2B Directory Bridge2B with Search Engine Optimization (SEO), where, thanks to sophisticated Search Engine Marketing (SEM), manufacturers, dealers, and service providers can efficiently present their products and services.

Product category Measuring microphone in the B2B Search Engine Bridge2B:
View this page in german:Messmikrofon
View this page in russian:Измерительные микрофоны

Alphabetical search for product category index:



Alphabetical search for product presentations of companies:


Copyright © 2004-2015 All rights reserved. Products |  Imprint   |